Commercial Asphalt Milling and Resurfacing
Ace Paving & Maintenance delivers commercial asphalt milling and resurfacing with the in-house equipment and field experience to bring your lot back to spec.
Your Lot Deserves More Than a Patch Job
Ace Paving & Maintenance has been delivering commercial asphalt milling and resurfacing across Metro Atlanta for nearly three decades. It’s the most effective way to restore a deteriorated parking lot to like-new condition, extend its service life, and avoid the cost of full reconstruction. From the first pass of the mill to the final layer of asphalt, we handle every step with our own equipment and crew. The team removing your old surface is the same team responsible for what goes down in its place, with no gaps in quality control and no divided accountability between phases.
Signs Your Parking Lot May Need Milling and Resurfacing
If your lot is showing widespread cracking, alligator-pattern cracking, deflection under load, water pooling after rain, or has already had one or more overlays that aren’t holding up, it’s time to have it assessed. Catching these issues before they reach the base can be the difference between a milling and resurfacing job and a full reconstruction.
Request a Free On-Site Assessment Today
Contact Ace Paving today to schedule your free on-site assessment and get a clear picture of what your lot actually needs.
The Right Choice for Commercial Property Managers and Facility Managers
Asphalt milling companies vary widely in equipment, crew experience, and how they manage a commercial job. Ace Paving & Maintenance has been the commercial property manager’s choice across Metro Atlanta since 1997, and it shows in how we work.
Local Ownership, Long-Term Accountability
We’ve been privately owned and operating in Metro Atlanta since 1997. When you work with Ace Paving & Maintenance, you have direct access to the people running the company, and you can count on us still being here if you have a question six months after the job is done. That’s not a given with every asphalt milling and resurfacing contractor in this market.
A Contractor Who Understands How You Operate
Property managers and facility managers don’t just need a paving crew. They need an asphalt milling company that understands the operational demands of managing a commercial property. Ace Paving works around your tenants, your traffic, and your timeline, and we’re invested in the long-term performance of your pavement, not just the immediate job.
A Process Built for Predictable Results
Every Ace Paving milling and resurfacing project follows the same sequence: profile mill to the appropriate depth, clean the surface thoroughly, apply a bonding agent, and install fresh asphalt over the remaining structure. Each step depends on the one before it, and none of them get skipped. That consistency is what separates a lot that holds up from one that fails ahead of schedule.
Frequently Asked Questions
What happens during an asphalt milling and resurfacing project?
Our crew removes the top layer of your existing asphalt to the appropriate depth, cleans the surface, applies a bonding agent, and installs a fresh layer of asphalt over the remaining structure. The result is a like-new surface without the cost or disruption of full reconstruction.
How do I know if my parking lot needs milling and resurfacing versus an overlay?
If your lot has significant cracking, base deflection, drainage concerns, or has already had one or more overlays, milling and resurfacing is typically the better approach. An overlay may be appropriate when the underlying structure is still sound and drainage isn’t an issue. It’s worth noting that milling and resurfacing typically costs significantly less than full reconstruction while delivering comparable results, making it the most cost-effective path for lots where the base is still intact. The right call depends on a thorough on-site assessment.
How long does asphalt resurfacing last?
A properly executed milling and resurfacing job on a well-maintained commercial lot can last 15 to 20 years or more, depending on traffic volume, load demands, and how consistently the surface is maintained after the fact. Staying on top of cracksealing and sealcoating goes a long way toward protecting that investment.
Is resurfacing cheaper than full replacement?
In most cases, yes. Because milling and resurfacing preserves the existing base structure, you’re not paying to remove and rebuild from the ground up. The exact cost difference depends on the condition of your lot, but for properties where the base is still sound, resurfacing is almost always the more cost-effective path.
How long does milling and resurfacing take?
Project timelines vary based on lot size, site conditions, and scheduling requirements. Most commercial milling and resurfacing jobs are completed within one to a few days. We plan every job around your operational needs to minimize disruption to tenants and traffic flow.
Start Your Next Project With Ace Paving & Maintenance
"*" indicates required fields